v1.41

  • New NX2312 support
  • New 3D engine update
  • New NX version independent modules
  • New Device support (Note: Set ENV "UGII_CAM_LIBRARY_DEVICE_ASCII_DIR")
  • New allow open specific entity in TMGR by URL or shortcut
  • Fix reset of JELM environment variable when updating TMDS
  • Fix missing surfaces druing step export
  • Fix two step shank loading in NX < v2306
  • Fix tracking point orienation of grooving 3D assemblies
  • Fix missing support module in TMGR without NX module
  • Fix reset of persistent filter when changing a class
  • Fix modifying persistent drop down filter
  • Fix disabling persistent wild card filter
  • Fix calculation errors of total length
  • Fix missing inserts when creating a new turning assembly
  • Fix dimensioning of holder steps in assembly drawings
  • TMS Plugin: New chinese translation
  • TMS Plugin: New setting to supress warning message during 3D export
  • TMS Plugin: Fix tip junction orientation of 3D models
  • TMS Plugin: Fix show info window after tool setup sheet export
  • TMS Plugin: Fix missing tool number in tool setup sheet
  • TMS Plugin: Fix missing tools in tool setup sheet
  • TMS Plugin: Fix missing feeds speeds calculation
  • TMS Plugin: Fix mapping of material groups
  • TMS Plugin: Fix 3D tool orientation
  • TMS Plugin: Fix feeds speeds view
  • ToolDirector Plugin: Fix mapping of tool shank steps

v1.40

  • -

v1.39

  • New image export of 2D/3D drawing
  • New usage of mill/drill components as adapter for turning assemblies
  • New multiple adapters for turning assemblies
  • Fix for saving full text filter
  • Fix for 3D import of tools in NX2306
  • Fix NX tool load error for tools with more than two shanks
  • Fix for hiding wire tools in New Wizard
  • Fix NX tool update when tool type has changed
  • Fix checkboxes are not working in cutting data view
  • Fix moving X/Y offset when saving a turning assembly
  • Fix TMS Plugin: Error when creaiting 3D model
  • Fix TMS Plugin: Turning tool can't be loaded in NX CAM
  • Fix TMS Plugin: Turning tip point

v1.38

  • New default holding system entries
  • New default holder classification
  • New icon for extension in default configuration
  • New Zoller TMS plugin installer support for setup sheets
  • Fix loading tools with a single tool shank step to NX < 2306
  • Fix writing MSI setup information into HKLM
  • Fix missing 'Tsdia' bug in new TMDS installations
  • Fix and improvement of user management
  • Fix overwriting X/Y offsets for assemblies with 3D models
  • Fix entity import with a different entity database id
  • Fix checking user rights of default admin user group
  • Fix tracking point positioning for 3D grooving inserts
  • Fix search bug for showing results of different plugins
  • Fix creating viewer groups without viewer license
  • Fix keeping tool number on tool update
  • Fix missing shank steps in entity import
  • Fix update user group issues
  • Fix DEF file creation problems
  • Fix Zoller TMS feeds and speeds view
  • Fix Zoller TMS plugin shank steps mapping
  • Fix Zoller TMS plugin DoveTailMill mapping
  • Fix Zoller TMS plugin 3D model creation bug
  • Fix Zoller TMS installer overwrites plugin config
  • Fix Evoset plugin replacing nominal tool list

v1.37

  • -

v1.36

  • New NX2306 support of dove tail mill and tool shank steps
  • New configuration to disable TMGR update notification
  • New import of exported TMGR entities in new wizard
  • New list of all cut methods in Technology view
  • New update of the TMGR 3D drawing kernel
  • New SuppportScript example file
  • Fix AttirbuteLogicScript is not executed when entity is created
  • Fix ThreadMill thread attribute drop down and NX mapping
  • Fix missing possibility to disable measuring points copy
  • Fix search resulkts of non-accessable TMDS plugins
  • Fix EntityTemplateConfiguration is not available for AdapterComponents
  • Fix search index reinitialization
  • Fix Assembly 3D import

v1.35

  • New combatibility check for TMDS and TMGR version
  • New BOM item UI elements in assembly detail view
  • New preview image for non-drawing entities
  • Fix missing dependencies in TMDS installer
  • Fix missing properties in search index
  • Fix grooving tool mapping in NX CAM
  • Fix saving/adding PartMaterial error
  • Fix NX signing changes for NX2212
  • Fix assembly 3D import crash
  • Fix delte of measuring points
  • Fix step editor preview
  • Fix 3D import labels
  • Fix documentation links

v1.34

  • New tool types for turning/grooving boring bars
  • New writeable 'Hld' attribute when no holder is defined
  • New button to preserve tool number at NX Tool update
  • New error message for more than 20 steps in step drills
  • New simplifying step drill geometry when its more than 20 steps
  • New improved 3D/sketch import for holder/step drill radius steps
  • Fix negative step angles of step drills during 3D import
  • Fix drawing error for negative step angles for step drills
  • Fix entity renaming in assembly detail view
  • Fix improvements of the memory consumption of TMDS
  • Fix “Format” of the AttributesConfiguration in detail views
  • Fix wrong rotation of 2D drawings in the table view mode
  • Fix “Mode” drop down for cut methods
  • Fix saving drawing mode for table view
  • Fix non-cutting geometry contains cutting bodies for 3D exports
  • Fix cross references for tool materials
  • Fix dynamic attribute type handling in detail views
  • Fix SpotDrill doesn’t update Pntl when Dia is changed
  • Fix deleting preview images when they are visible in table view
  • Fix configuration window is now maximizable
  • Fix missing selectable attributes in the table view configuration window
  • Fix export the whole 3D model when exporting a step model in detail view
  • Fix losing selection when moving steps/points up or down in detail view
  • Fix EntityTemplate is not applied for items or assemblies
  • Fix ToolDirector: New item revision for export in managed mode
  • Fix ToolDirector: Missing “Hld” attribute mapping

v1.33

  • New NX2212 TCL support
  • New IOConfiguration entry for 3D export part name attribute
  • New minimum stick out length holder attribute and check script
  • Fix persitent search filter change states when swichting classes
  • Fix enabled tracking point fields when entity is not checked out
  • Fix tracking point table looses the selection after deleting entry
  • Fix missing type checking for custom attributes
  • Fix sorting of string columns in table view
  • Fix missing log outputs for TMDS actions
  • Fix missing stick out length for components in JSON output
  • Fix missing generic tools (generic/probe) when creating mill/drill assemblies
  • Fix TMGR ghost searches when session is terminated
  • Fix ToolDirector container ID parsing for non-numeric IDs
  • Fix ToolDirector wrong total length in StepDrill mappings

v1.32

  • New notification for Technoogy Manager updates
  • New support function for exporting all tool assembly NX parts
  • New "Update Tool Name" feature for NX tool update
  • Fix admin user loses admin privileges when modifying settings
  • Fix deleted entities are not removed from search index
  • Fix "AskAttributeSearch" method for post processors

v1.31

  • New viewer licenses for TMGR users
  • New post_extensions.tcl command for searching in TMDS
  • New plugin interface for NXInterface to execute custom function on CAM startup
  • Fix 3D import of StepDrills in NX1899 and NX2206
  • Fix 3D import of arc elements for MillForm
  • Fix cutting data can't be deleted in TMGR
  • Fix select all function in table view of TMGR
  • Fix wrong diameter dimension of CoreDrill tools
  • Fix Zoller TMS plugin to load 3D tools
  • Fix Evoset plugin exports

v1.30

  • New export of entities including files
  • New sub entities for adding new entities directly under an existing one
  • New "GetEntitiesAttributes" methods for TMDS REST service
  • Fix 3D import problems in NX2206
  • Fix empty search in multi plugin environments when adding new components to an assembly
  • Fix empty search for items when adding new items to a BOM
  • Fix filter losing its settings after a class is changed
  • Fix wrong Y positioning when creating a turning assembly
  • Fix NX Tools update when using grooving tools
  • Fix dimensioning for measuring points and chamfer length
  • Fix shank drawings for full tool relief length
  • Fix ToolDirector zero steps in step drill mappings
  • Fix ToolDirector step drill mappings for ProgLen > Flen
  • Fix ToolDirector step drill mappings for wrong ProgLen

v1.29

  • New X-/Y-Offset input by property grid and drawing in turning assemblies
  • New FeedsSpeeds script for MillForm diameter by selected tracking point
  • Fix NX warnings when starting NX in TMDS envrionment
  • Fix NX ONT screen flickering when loading one or more tool/s
  • Fix selecting wrong AttributesConfig when type is specified
  • Zoller TMS: Fix loading 3D models when loading tool in NX CAM

v1.28

  • New filter for "3D Model", "Component", "Toolname" and "Item"
  • New NXTools plugin "Tool Name Update" for FBM tool name reset
  • Fix LIBRF is missing in NX CAM for turning tools
  • Fix missing default insert posiiton in tunring tools
  • Fix search for "Hld" values in assembly database
  • Fix Mill/Drill tools/holders can be selected for turning assemblies
  • Fix wrong translations when using a different langauge than english
  • Fix StepDrill/MillForm bodies are not closed for NXToolsCompare split
  • Fix wrong comparings of toolsin NXToolsCompare
  • Fix wrong attribute configuration selection in DetailView
  • Fix NX CAM ONT screen flickering when loading/updating tools
  • Fix ToolDirector mapping for tool shaft geometry
  • Fix ToolDirector mapping for mill form radius segments
  • New ToolDirector mapping support for StepDrill steps
  • New ToolDirector mapping for FaceMill/ChamferMill Diameter2

v1.27

  • New NX2206 support
  • New Teamcenter MRL read only interface for TMDS
  • New environemnt vairable for TMDS dump temp folder
  • Fix StepDrill drawings after Eyeshot 2022 update
  • Fix overwrite tool attributes by assembly attributes when loading to NX
  • Fix search part by ID in TMDS
  • Fix lock icon of inherited filters
  • Fix 3D export problems of inch tools
  • Fix 3D export of inserts with a negative OA
  • Fix predefined item seleciton in tool compare