When roughing a workpiece, we might have to leave a stock on the workpiece in order to finish it later. At first glance, however, Siemens NX only allows us to define the same stock in one operation for all selected faces. But what do we do if we need different stocks on different surfaces of our workpiece and want to do it all in one operation? As we will show you in today's QuickTip, this is no problem in NX.
Setting different stocks in NX CAM
NX CAM QuickTip | Using Multiple Stocks in the Same Operation
Assigning stocks in NX
In our example, we are currently manufacturing the wall faces of a workpiece.
We have already shown you how to quickly and easily select certain faces of a workpiece in our last Quicktip (→ see here).
Our challenge today is that we want to assign a stock individually for only a few of the selected faces of our workpiece. And we want to do it all in one operation.
However, in this way we can only set the exact same stock for all selected surfaces.
But if you want to assign a stock for only a part of the surfaces or assign a different stock for some surfaces, we will not get anywhere with this function.
Fortunately, Siemens NX offers a better solution.
→ How to set a stock individually
If you now select one of the surfaces in the list, you will always see the corresponding surface on your workpiece displayed in color. In the same way, you can click on a surface on your workpiece and NX will automatically jump to this line in the list of faces.
In the next step, select the surface on your workpiece for which you want to add an individual stock. Now you can check the Stock-Box - as shown above - and enter a stock.
You want more tipps and tricks on Siemens NX?
Then go and check out our YouTube channel.
Topics:
Subscribe to our blog
Tips and news around digital manufacturing.